honda 150 fourstroke outboards.
|
Logged in as: Guest
|
|
Users viewing this topic:
none
|
|
Login  | |
|
honda 150 fourstroke outboards. - 2/10/2007 4:55:51 PM
|
|
|
bushfollower
Posts: 2
Joined: 2/5/2007
Status: offline
|
i now got the oil out but how do i get the gear oil in? do i need some special tool for that? someone told me that i need a pump, does that sound right? how much gear oil does it take? any help is appreciated
|
|
|
|
|
RE: honda 150 fourstroke outboards. - 2/11/2007 4:19:20 PM
|
|
|
alftexas
Posts: 2
Joined: 1/25/2007
Status: offline
|
The Honda marine site ,which you might want to download the owners manual for for specific model number, says it holds 1.04 US quarts and gives you the type of oil. You should be able to squeeze it into the top hole with the srew out. Most containers for this oil have this built into top or use a small funnel. It should just be filled to the level of that hole so you cannot overfill.Hope this helps. The owners manual talks about using a pump to extract the engine oil but it can be gravity removed just as you did the lower unit oil.
|
|
|
|
|
[Deleted] - 12/9/2007 3:22:10 PM
|
|
|
Deleted User
|
[Deleted by Admins]
|
|
|
|
 New Messages |
 No New Messages |
 Hot Topic w/ New Messages |
 Hot Topic w/o New Messages |
 Locked w/ New Messages |
 Locked w/o New Messages |
|
 Post New Thread
Reply to Message
Post New Poll
Submit Vote
Delete My Own Post
Delete My Own Thread
Rate Posts |
|
Honda body kits, hoods, and lambo doors Honda and the Honda marque are registered trademarks of America Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for HondaForum.com content, comments, or advertising. HondaForum.com is not affiliated with America Honda Motor Company in any way. America Honda Motor Company does not sponsor, support or endorse HondaForum.com in any way. Copyright/trademark/sales mark infringements are not intended, or implied.
0.000
|
|
Printable Version
